|
The CCX-15 is a military grade high performance 1U rackmount clamshell LCD keyboard drawers offering a 15-inch transflective display with LED backlighting. The CCX-15 is designed to meet Mil-Std 901D and 810F and includes a solid milled aluminum front panel, lightweight 5052-H32 aluminum construction and locking stainless hardware throughout. Electrical components are selected for their inherent ruggedness and mounted to enhance that.
The drawer is held closed by two captive thumb screws. Lock out friction slides are included. Friction slides assure the drawer stays where positioned in the back of a moving vehicle for much easier use. Friction slides are much less prone to damage or jamming from dust and dirt. The CCX-15 is ideal for mounting in a transit case for adverse environments that would destroy lesser displays. A folding front handle minimizes protrusions into the workspace to protect the operators. A rear mounted cable management arm is provided. Installed depth is only 22-inches without the cable management arm and 24.4-inches with the arm.
The 15-inch display is a high quality long life Appolo transflective TFT LCD with a maximum native resolution of 1024x768 and provided with an LED backlight.
The display is provided with 1.1mm soda lime glass with an ITO conductive EMI filter and an additional 1.1mm soda lime glass overlay with sputtered anti-reflective (AR) coating. Both pieces of glass are optically bonded to each other and to the front of the display for superior viewing and ruggedness. A 3mm copper bus bar around the entire glass stack-up provides grounding. The contrast is enhanced to approximately 1300:1 for both displays with this ITO/Anti Reflective glass stack-up. The maximum brightness is 560 lumens. The combination of transflective technology, AR filtering and very high brightness makes for an incredibly easy to see display in virtually any lighting condition including direct sunlight.
The keyboard is a 113 key NEMA-4 rated sealed silicone rubber keyboard with tactile feedback and full travel for comfortable typing. Carbon on gold contacts assure reliable operation. The keyboard is rated for 10 million lifecycles per switch. A sealed hall effect pointing device is included in the keyboard along with 3 "mouse" buttons. Both PS/2 and USB outputs are standard. A wrist pad is included. The keyboard is completely sealed to meet IP-65 to prevent liquid ingress so coffee and Coke spills don't faze it. The keyboard can be wiped down with a wet rag to clean any spills.
Video inputs of analog VGA, DVI-D or DVI-I, NTSC/PAL/SECAM, Composite, S-Video and Component (YCbCr) are available on selected models depending on the installed controller.
LCD Controller Options
Three military grade LCD controllers are available providing a wide variety of input options. These controllers are conformal coated for durability with extended temperature ranges of -40 to +80 Deg C. operating. All are based on Genesis chipsets for state of the art display features and stability. The controllers are road mapped for long product availability for use in multi-year programs where consistency and reliability are paramount.
- HE1400 - DVI-D and aRGB VGA inputs. Up scaling to fit image resolution to panel native resolution.
- HE1600 - DVI-I, aRGB VGA, Video (NTSC/PAL,SECAM, Composite Video, S-Video, Component Video YCbCr). Up/Down scaling to fit image resolution to panel native resolution.
- HE-1920 - DVI-D, aRGB VGA, Video (NTSC/PAL,SECAM, Composite Video, S-Video, Component Video YCbCr). Up scaling to fit image resolution to panel native resolution. Horizontal and vertical image inversion. Picture-in-picture.
Power Options
The basic display operates from 12VDC. An EMI filter is included inside the keyboard assembly.
The standard option is a 110/220VAC 50/60Hz supply. Options are available for a 12VDC transient filter to allow reliable operation from vehicular 12VDC systems, MIL-STD 704/1275 28VDC supply, and a 48VDC supply.
Included with each supply is a rack mount bracket allowing secure mounting of the supplies in any standard rack.
KVM Options
A family of 4– or 8-port KVM switches are available with front panel button selection and active port LED indication. Models are available with DVI or analog VGA inputs with USB and PS/2 keyboard/mouse connections. The KVMs are rack mounted separately from the keyboard assemblies to allow more options for mounting and to minimize installed depth.
As with all Chassis Plans products, a wide variety of custom options are available including paint color, customer logo, high-bright daylight modification, and keyboard options.
1U (1.71") x 24.4" deep
Front Panel milled 5052 aluminum alloy
Body made of 5052-H32 aluminum alloy
All stainless steel hardware
All self locking pressed in fasteners where appropriate
Powder coat black, medium texture, for ruggedness Other colors optionally available
Designed to Mil-Spec Standards to Satisfy Military, Industrial and Commercial Requirements
Compact Enclosure for Limited Depth Installation
Weight: 35lbs (w/o KVM)
38lbs (w/ KVM)
15" TFT LCD 1024x768 transflective TFT
LED backlighting
1.1mm soda lime glass ITO filter bonded to display
1.1mm soda lime glass AR filter bonded to ITO filter
Display Colors: 16.7 Million
Response Time: 8mS Typical
Viewing Angle: 80 deg
Contrast Ratio: 700:1 typical native,
1300:1 w/ bonded AR filter
Brightness: 560cd/m2 typical
Pixel Pitch: 0.297mm x 0.297mm
Pixel Arrangement: R.G.B Stripe
Power Management: EPA Energy Star, VESA DPMS
Operating Temperature: -30 to +70 Deg C
Storage Temperature: -40 to +80 Deg C
The three offered controllers are Harsh Environment versions with wide range operating temperatures of -40 to +80 Deg C, shock and vibration tolerance with conformal coating for extreme environmental applications
HE-1400 DVI-D/VGA Input Features
Chipset: Genesis
Inputs:
Analog RGB: 60Hz at SXGA, WXGA, XGA, SVGA, VGA
With auto detect of Digital Separate Sync, Sync-On-Green & Composite Sync. Auto detects VGA ~SXGA interlaced & noninterlaced.
DVI-D: 60Hz at SXGA, WXGA, XGA, SVGA, VGA
Image Scaling: Up / down scaling to fit input to panel resolution.
Image Control: Brightness, Contrast, Saturation, Hue, Frequency, Phase, Color temperature, Image position, Hue, Gamma.
Other Features: Auto picture setup, Auto RGB calibration, Auto source seek, OSD timeout, OSD position, Input source select, OSD menu lock, Direct key for brightness level adjustment, alternate control of all controller functions and parameters via built-in serial port.
HE-1600 Multi-input features
Chipset: Genesis
Inputs:
Analog RGB: 60Hz @ UXGA, 75Hz @ SXGA, WXGA, SVGA,
VGA,1 152 x 900 @ 66Hz (SUN)
1152 x 900 @ 76Hz (SUN),
1280 x 1024 @ 76Hz (SUN)
With auto detect of Digital Separate Sync, Sync-On-Green & Composite Sync. Auto detects VGA ~USXGA interlaced & non-interlaced.
DVI-I: 60Hz @ UXGA, 75Hz @ SXGA, WXGA, XGA, SVGA, VGA
Video: NTSC / PAL / SECAM (Interlaced),
Composite Video,S-Video,
Component (YCbCr) (Optional)
Image Scaling: Up / down scaling to fit input to panel resolution.
Image Control: Brightness, Contrast, Saturation, Hue, Frequency, Phase, Color, Temperature, Image position, Hue, Gamma.
Other Features: Auto Picture Setup, Auto Color Gain, Auto Power, OSD Timeout Position and Transparency, Hot Keys, Auto Source Seek, alternate control of all controller functions and parameters via built-in serial port.
HE-1920 Multi-Input DVI/VGA/Video Input Features:
Chipset: Genesis
Inputs:
Analog RGB: 60Hz at UXGA, 75Hz at SXGA, WXGA, XGA, SVGA, VGA
With auto detect of Digital Separate Sync, Sync-On-Green & Composite Sync. Auto detects VGA ~UXGA interlaced & noninterlaced.
DVI-D: 60Hz at WUXGA, UXGA,
75Hz at SXGA, WXGA, XGA, SVGA, VGA
Video: NTSC / PAL / SECAM (Interlaced),
Composite Video,S-Video, RBG Video,
SD Component (YCbCr) (Optional)
Image Scaling: Up scaling to fit input to panel resolution.
Image Control: Auto configuration, Brightness, Contrast, Clock, Phase, Color Temperature, Image position, Saturation, Hue, Gamma.
Other Features: System Information, OSD position,
Scaling to fill screen and fill to aspect ratio, OSD timeout, Factory reset, OSD menu transparency, Horizontal & Vertical image inversion, Picture in Picture, alternate control of all controller functions and parameters via built-in serial port. STANAG 3350 Class B (PAL), Class C (NTSC or RS-170) Standard, STANAG Class A (RS-343) with optional firmware upgrade.
KEYBOARD
Sealed silicone rubber keyboard
113 Keys
20 Function keys
Integrated numeric pad
High quality carbon-on-gold contacts
Protection to NEMA 4 / IP65 dust & splash proof
(spilled coffee/Coke proof!)
Universal PS/2/USB Connection
Tactile Keystroke
10,000,000 lifecycles per switch
POINTING DEVICE
Incorporated pointing device (mousebutton) for precise tracking
3 Mouse buttons
Built in to silicone rubber keyboard
Hall sensor motion detection
Universal USB & PS/2 interface
AC Input
100 to 260VAC, auto selecting
47-66 HZ
12VDC Input Transient Filter
Line transient protection for 12VDC vehicular applications
Mil-Std-704 / 1275A DC/DC Converter
True 704 / 1275 compliance for military 28VDC nominal vehicle inputs
18 to 36VDC input
48VDC DC/DC Converter
36 to 75VDC Input
Isolated Inputs for +/- input levels
See the appropriate power supply section in the manual for complete power supply specifications.
FCC-A, CE (in process)
Optional UL, CSA, CE/ENC, DHHS, NORDICS, TUV/GS, 1S09241-3,
FCC-B, MPR II, TCO 95
Mil-Std 901D, 810G, 167 (in process)
Normal: 60W (front LED Green)
Operating conditions:
Temperature: -30 to +80deg C
Humidity: 10% to 90% non-Condensing
Altitude: 12,000 feet
Storage conditions:
Temperature: -40 to +80 deg C
Humidity: 5% to 95% non-Condensing
Altitude: 40,000 feet
|
