MULTI MONITOR PORTABLE DISPLAY | 3-LCD PORTABLE LCD DISPLAY MONITOR
RACKMOUNT LCD KEYBOARD DISPLAYS & LCD MONITORS
|
CPDT-3X17 3View To Go™ with Three 17" LCDs  See the Whole Picture - Bigger is Better!
Instantly set up a multi-monitor display by simply unlatching and flipping out the two wing displays to get three 17-inch high performance LCDs in one unit. Utilizing the same design features as our popular MP3X17 Multi Monitor Portable Computer, the 3View To Go system transforms from a briefcase size device to three 17-inch LCDs in a matter of seconds. The displays can be opened to any angle up to 180 degrees (flat). The 17-inch displays each offer 1280x1024 native resolution for an effective total size of 3840x1024. Each display is provided with its own set of controls. Options provide for either three independent VGA input ports, three DVI-D ports, or a single VGA port operating all three displays. The single VGA input model uses a Matrox Triple Head To Go video combiner to control the three LCDs from the single input. The unit is powered from AC mains of 90 to 264VAC, 50/60 Hz. The CPDT-3X17 is manufactured from light weight aluminum alloy and weighs only 25 pounds. It is built for portable use and all electrical components are selected for their inherent ruggedness and mounted to enhance that. A padded handle on the top aids handling. The corners are provided with rubber corner pads to help protect against accidental bumps. A wheeled transit case is provided as standard equipment. The unit is held closed by a single latch holding the left display closed. Simply lift up the latch, fold out the left display, then the right, plug into power, connect the video cables and the unit is ready for use. Adjustable feet on the bottom allow the unit to tip backwards for easier viewing when sitting on a desk or table. The rear of the unit provides for a standard VESA mounting and a variety of options allow for the display to be easily pole or arm mounted to get it up off the work surface. The system is convectively cooled without the use of fans so it contributes no noise to the work environment. The 17-inch displays are high quality long life LCDs with a maximum native resolution of 1280x1024. All the displays are provided with a tempered glass overlay to protect the displays. Options are available for optically bonded glass filters with anti-reflective coatings and enhanced LCDs for use in high bright environments. The systems ship with appropriate 6-foot long video cables and a 9-foot long power cable. Mechanical Dimensions: Closed: 15.5 x 14.0 x 5.9-inches (H x W x D) Open: 42.9 x 14.0 x 5.9-inches (H x W x D) Weight: 25.2 pounds (cables not included) Construction - Aluminum alloy external chassis w/ rubber corners. Aluminum alloy inner frame. Soft Side Case Dimensions - 17" W x 15" D x 18.3" H, 11.4 pounds Displays Three 17-inch diagonal TFT displays Resolution: 1280x1024 each, effective total resolution across all 3 is 3840x1024 Brightness: 300nits Contrast: 500:1 Aspect: 5:4 Viewing Angle: 160 degrees vertical and horizontal Response: 5ms Typical LCD Protection: Tempered glass overlay Backlight MTBF: 50K hours Each display is provided with independent controls and can be independently configured Options: Touch screens, high-bright LCD enhancements, bonded glass w/ anti-reflection coatings Regulations FCC-A, CE, RoHS Optional UL, CSA, CE/ENC, DHHS, NORDICS, TUV/GS, 1S09241-3, FCC-B, MPR II, TCO 95 Power Consumption Normal: 90W Environmental Operating conditions: Temperature: 0 to 50deg C Humidity: 10% to 90% non-Condensing Altitude: 12,000 feet Storage conditions: Temperature: -20 to 60 deg C Humidity: 5% to 95% non-Condensing Altitude: 40,000 feet |
||
Rackmount LCDs & Keyboards