- Wall mount / bulkhead mount
- Two internal 3.5 inch hard drives
- One internal 5.25 inch drive tray
- Included slim CD/Floppy adapter bracket
- Four high flow 90mm hot swap cooling
fans
- EATX Motherboard (13 x 12 inches)
- Universal card hold down system
- Various power options including redundant
- Various front door LCD options
- Custom paint and logo available
- Configured System Offered
|
|
The W5 Series Wallmount
chassis represents the next generation in
industrial computing enclosures providing
high performance in a low cost rugged enclosure.
Feature rich, the W5 Series is a solid,
robust design which will meet the most rigorous
and demanding requirements. This is a ground-up
design optimized for bulkhead and wall mounting.
The W5 is not a reworked rackmount design.
The W5 is perfect for
a wide variety of applications where an
office style enclosure does not provide
appropriate protection and a 19" rack
is not available. The W5 can be hung exposed
on a wall in a factory, in a closet such
as a security system, mounted in a Hoffman
enclosure on a drilling rig, and so forth.
When the door is closed, it does not look
like a computer which has high appeal for
theft and vandalism mitigation.
The enclosure is constructed
of 18 gauge steel, clear zinc plated for
corrosion protection and completely painted
for an attractive appearance.
There is more than
ample drive storage with the provided two
internal 3-1/2" hard drive locations,
and one front accessible 5-1/4" inch
drive bay. Included in the 5-1/4" space
is a slim floppy / slim CD/DVD adapter bracket.
A lockable door protects
the installed components from prying hands.
The door is sealed with fabric covered EMI
gasket for both EMI and environmental sealing.
The high quality locking compression latch
sets the EMI gasket when the door is closed.
Accessible behind the door is the power
and reset switches as well as the power-on
and drive activity LED's.
|
The
top I/O cavity is protected by a removable
cover which is locked in place when the door
is closed. Conduit knockouts are provided
on both sides of the chassis. Thus, attached
cables are protected from access by unauthorized
persons. With the door closed and locked,
the W5 becomes tamperproof.
The bottom exterior
of the chassis provides a large air filter
mounted in an easily removed bracket for
ease of cleaning. Access to the inside is
not required for filter removal. Cooling
is provided by 4 hotswap 90mm 49CFM fans.
Several fan options are available for higher
flow or quieter operation including adaptive
temperature controlled fans.
The W5 Chassis provides
for mounting an EATX motherboard. An innovative
card hold-down mechanism assures cards stay
seated in high vibration environments such
as shipping and when mounted on operating
machinery.
Power supply options
include standard PS/2 form factor, redundant
hot swap and 12/24/48VDC input supplies.
The system provides outstanding cooling
so virtually any power requirement such
as dual XEON can be accommodated in any
environment.
Many options are available
for the W5 chassis including door mounted
LCD/Control panels and door mount LCD displays
to 17" 1024x1280 in vertical orientation.
The W5 is ideally designed for MOTS (Modified
Off The Shelf) requirements. Chassis Plans
specializes in custom and semi-custom designs
optimized for customer requirements.
|
Downloadable PDF files
WALL MOUNT EATX BULKHEAD MOUNT COMPUTER CHASSIS
16.95" (wide)
x 21.94" (high) x 8.64" (deep)
WALL MOUNT EATX BULKHEAD MOUNT COMPUTER CHASSIS
Two internal 3-1/2" hard drive brackets
One internal 5-1/4" drive tray.
The 5-14" drive tray is provided standard
with an adapter for a slip floppy and slim
CD/DVD drive.
WALL MOUNT EATX BULKHEAD MOUNT COMPUTER CHASSIS
Power switch
- momentary with 2 position .100 header for
board connection
Reset switch - momentary with 2 position .100
header for board connection
Power LED - green with 3 position .100 header
for board connection
Drive Activity - Amber with 2 position .100
header for board connection
Switch and LED connectors are labeled at
the connector end.
The controls and LED's are mounted behind
the lockable door.
Top I/O Wiring Cavity
Details
7 Plug-in card slots
Internal knockouts for 2 DB9, 1 DB15, 1 DB25
and 1 SCSI connectors
Standard ATX I/O shield opening
One 1/2" conduit knockout provided on
each side of chassis
Cavity vertical height is 2.5" for I/O
connectors and cables
WALL MOUNT EATX BULKHEAD MOUNT COMPUTER CHASSIS
Four 90mm
49CFM fans
Fans are mounted in hot swap brackets w/ blind
power connectors
Positive chassis pressure
30PPI filter installed on bottom exterior of
chassis
Fan Options: thermister regulated fan speed,
3-wire tach signal, higher or lower flow rates
WALL MOUNT EATX BULKHEAD MOUNT COMPUTER CHASSIS
PS/2 Style supply - not provided
AC Input - Zippy HG2, HP2, PSM, PSL, AX2,
SP2, LP2, MP2, SPE
Redundant AC Input - Zippy MRT, MRP, MRW,
MRG,
DC Input - Zippy DB2 (24VDC), DD2 (48VDC),
MB2 (24VDC), MD2 (48VDC)
Motherboard Mounting (W5
Models)
Standard 13 x 12 inch EATX motherboard
Motherboard adapter plate accommodates any
motherboard
WALL MOUNT EATX BULKHEAD MOUNT COMPUTER CHASSIS
Chassis Plans is more than a chassis supplier.
We offer a complete product line including
the latest motherboards, drives, video
boards and plug-in cards including analog/digital
I/O cards. Integrating today's complex
systems can be a challenge. Allow us to
provide you with a professionally integrated
system with the OS loaded and the system
tested and burned-in as a complete unit.
We stand behind our work 100%.
|
|
