- Wall mount / bulkhead mount
- Two internal 3.5 inch hard drives
- One internal 5.25 inch drive tray
- Included slim CD/Floppy adapter bracket
- Four high flow 90mm hot swap cooling
fans
- Passive backplane to 14 slots
- Universal card hold down system
- Various power options including redundant
- Various front door LCD options
- Custom paint and logo available
- Configured System Offered
|
|
|
The W5000 Series Wallmount
chassis represents the next generation in
industrial computing enclosures providing
high performance in a low cost rugged enclosure.
Feature rich, the W5000 Series is a solid,
robust design which will meet the most rigorous
and demanding requirements. This is a ground-up
design optimized for bulkhead and wall mounting.
The W5000 is not a reworked rackmount design.
The W5000 is perfect
for a wide variety of applications where
an office style enclosure does not provide
appropriate protection and a 19" rack
is not available. The W5000 can be hung
exposed on a wall in a factory, in a closet
such as a security system, mounted in a
Hoffman enclosure on a drilling rig, and
so forth. When the door is closed, it does
not look like a computer which has high
appeal for theft and vandalism mitigation.
The enclosure is constructed
of 18 gauge steel, clear zinc plated for
corrosion protection and completely painted
for an attractive appearance.
There is more than
ample drive storage with the provided two
internal 3-1/2" hard drive locations,
and one front accessible 5-1/4" inch
drive bay. Included in the 5-1/4" space
is a slim floppy / slim CD/DVD adapter bracket.
A lockable door protects
the installed components from prying hands.
The door is sealed with fabric covered EMI
gasket for both EMI and environmental sealing.
The high quality locking compression latch
sets the EMI gasket when the door is closed.
Accessible behind the door is the power
and reset switches as well as the power-on
and drive activity LED's.
|
The
top I/O cavity is protected by a removable
cover which is locked in place when the door
is closed. Conduit knockouts are provided
on both sides of the chassis. Thus, attached
cables are protected from access by unauthorized
persons. With the door closed and locked,
the W5000 becomes tamperproof.
The bottom exterior
of the chassis provides a large air filter
mounted in an easily removed bracket for
ease of cleaning. Access to the inside is
not required for filter removal. Cooling
is provided by 4 hotswap 90mm 49CFM fans.
Several fan options are available for higher
flow or quieter operation including adaptive
temperature controlled fans.
The W5000 Chassis provides
for mounting a passive backplane, up to
14 slots. An innovative card hold-down mechanism
assures cards stay seated in high vibration
environments such as shipping and when mounted
on operating machinery.
Power supply options
include standard PS/2 form factor, redundant
hot swap and 12/24/48VDC input supplies.
The system provides outstanding cooling
so virtually any power requirement such
as dual XEON can be accommodated in any
environment.
Many options are available
for the W5000 chassis including door mounted
LCD/Control panels and door mount LCD displays
to 17" 1024x1280 in vertical orientation.
The W5000 is ideally designed for MOTS (Modified
Off The Shelf) requirements. Chassis Plans
specializes in custom and semi-custom designs
optimized for customer requirements.
|
Downloadable PDF files
Dimensions
16.95" (wide)
x 21.94" (high) x 8.64" (deep)
Drive Capacity
Two internal 3-1/2" hard drive brackets
One internal 5-1/4" drive tray.
The 5-14" drive tray is provided standard
with an adapter for a slip floppy and slim
CD/DVD drive.
Front Panel Controls
Power switch
- momentary with 2 position .100 header for
board connection
Reset switch - momentary with 2 position .100
header for board connection
Power LED - green with 3 position .100 header
for board connection
Drive Activity - Amber with 2 position .100
header for board connection
Switch and LED connectors are labeled at
the connector end.
The controls and LED's are mounted behind
the lockable door.
Top I/O Wiring Cavity
Details
14 Plug-in card slots
Internal knockouts for 2 DB9 and 1 AT keyboard
One 1/2" conduit knockout provided on
each side of chassis
Cavity vertical height is 2.5" for I/O
connectors and cables
Cooling
Four 90mm 49CFM fans
Fans are mounted in hot swap brackets w/ blind
power connectors
Positive chassis pressure
30PPI filter installed on bottom exterior
of chassis
Fan Options: thermister regulated fan speed,
3-wire tach signal, higher or lower flow rates
Power Supply
PS/2 Style supply - not provided
AC Input - Zippy HG2, HP2, PSM, PSL, AX2,
SP2, LP2, MP2, SPE
Redundant AC Input - Zippy MRT, MRP, MRW,
MRG,
DC Input - Zippy DB2 (24VDC), DD2 (48VDC),
MB2 (24VDC), MD2 (48VDC)
Passive Backplane (W5000
Models)
14-Slot ISA/PCI accommodated
Available
Backplanes
-
BPX6620
- 14 Slots, 1 CPU, 2 PCI Express, 10 PCI-X
-
BPX3/8
- 11 Slots, 1 CPU, 2 PCI Express, 4 PCI-X,
4 PCI
-
BPG6600
- 14 Slots, 1 CPU, 2 PCI Express, 6 PCI-X,
4 PCI
-
BPG6544
- 14 Slots, 1 CPU, 2 PCI Express, 5 PCI-X,
4 PCI
-
BP1/1/2/4/4
- 12 Slots, 1 CPU, 7 PCI-X, 4 PCI
-
BP3/6/4
- 13 Slots, 1 CPU, 10 PCI, 2 ISA
-
BP3/2/4/4
- 13 Slots, 1 CPU, 10 PCI, 2 ISA
-
BP3/10
- 13 Slots, 1 CPU, 10 PCI, 2 ISA
-
BP7/6
- 13 Slots, 1CPU, 6 PCI, 6 ISA
-
BP11/3
- 14 Slots, 1CPU, 3 PCI, 10 ISA
-
BP2S13
- Split, 13 Slots, 6 PCI, 5 ISA
-
BP14ISA
- 14 ISA slots
-
BP14ISA8PCI4
- 2 CPU, 8 ISA, 4 PCI
-
BP14S2
- Split 2x 2 CPU, 1 ISA, 4 PCI
-
BP14S4
- Split 4x 2 CPU, 3 PCI
-
Chassis Plans is more than a chassis supplier.
We offer a complete product line including
the latest motherboards, drives, video
boards and plug-in cards including analog/digital
I/O cards. Integrating today's complex
systems can be a challenge. Allow us to
provide you with a professionally integrated
system with the OS loaded and the system
tested and burned-in as a complete unit.
We stand behind our work 100%.
|
|
