- 6U x 26.4 inch depth design
- Seven 5-1/4 inch front drive bays
- One 3-1/2 inch front drive bay
- Four hot swap cooling fans
- Thermal management card
- Full sized EATX motherboard
- Seven I/O card slots
- Various power options
- Custom paint and logo available
- Configured System Offered
|
Additional
Photos |
The A2 Series chassis is a high performance
design in a low cost 6U rackmount enclosure.
Feature rich, the A2 Series is a solid,
robust design which will meet the most
rigorous and demanding requirements. This
chassis is ideal for I/O intensive applications
such as telephony, data acquisition, Digital
Video Recording (DVR), high density web
server, back office server, firewall,
proxy server and VPN gateway applications
including collocation.
The enclosure is
constructed of 18 gauge steel, clear zinc
plated for corrosion protection and an
attractive appearance. The front panel
is attractively detailed and is of heavier
gauge than the chassis.
There is a huge amount
of drive space with the seven front accessible
5-1/4" drive bays. This allows for
a low cost RAID implementation using SCSI
or ATA drives. One external 3.5 inch drive
is also available.
|
A door covers and protects the drives.
Accessible behind the door is the power
and reset switches as well as the power-on
and drive activity LED's. The LED's are
visible through the door when it is closed.
Cooling is provided
by four 90mm 51CFM hot swap fans. The
thermal management board monitors fan
operation.
The A2 Chassis
provides for mounting a standard Extended
ATX (EATX) motherboard up to 12 x 13-inches.
Depending on the CPU selection, up to
7 plug-in cards can be installed. This
chassis is perfect for mounting a server
class dual processor motherboard.
Power is provided
by rear mounted PS/2 style power supply.
Several power supply options are available
including redundant power.
|
Downloadable PDF
files
Dimensions
19" (wide)
x 6U (10.45") (high) x 26.4" (deep)
Drive Capacity
Seven 5-1/4 inch drives - front accessible
One 3-1/2 inch drive - front accessible
Front Panel Controls
Power
switch - Black momentary rocker with 2 position
.100 header for board connection
Reset switch - Four pushbuttons with 2 position
.100 header for board connection*
Power LED - Green with 3 position .100 header
for board connection
Drive Activity - Red with 2 position .100
header for board connection
Switch
and LED connectors are labeled at the connector
end.
* Note: Four reset switches are provided for
use with up to a 4 section segmented backplane.
Rear Panel Details
7 Plug-in card slot
2 DB9, 1 DB15, 1 DB 25 and 1 SCSI connector
knock outs.
Four keyboard connector holes.
Cooling
Four 90mm 51CFM fans
Positive chassis pressure
Full-width air filter located behind drive
door.
Thermal Management
Board
Monitors the following chassis parameters.
Audible alarm sounded on system failure.
Rear panel mounted terminal block for
NO/NC contact closure for external alarm.
-
-
Chassis
over-temperature settable for 40, 50,
60 deg C alarm point
-
Two
remote chassis temperature probes.
-
-
Front
panel indication of system alarm status
Power Supply
Not included.
Rear mounted redundant style.
AC Input - Zippy RAH and RHH form factor
Optional 12, 24 or 48VDC supplies available
Motherboard mounting
EATX motherboard up to 12 x 13-inches
Plug-in I/O Cards
Depending on configuration, accommodates up
to 7 plug-in I/O cards
Rack Slides
See Rack Slides
for an offering of available slides.
Chassis Plans is more than a chassis
supplier. Our primary business is providing long life span fully integrated turnkey systems tailored exactly to customer specification. We are experts at multi-vendor integration and offer a complete product
line including the latest long-life motherboards,
drives, video boards and plug-in cards
including analog/digital I/O cards.
Integrating today's complex systems
can be a challenge. Allow us to provide
you with a professionally integrated
system with the OS loaded and the system
tested and burned-in as a complete unit.
We stand behind our work 100%.
|
|
