- 3U x 25.6 inch depth design
- Front door provides security
- Twelve hot swap drive bays
- One slim CD and Floppy drive bay
- Two 2-1/2 inch internal drives
- Four 51CFM cooling fans
- One 23CFM exhaust fans
- EATX motherboard
- Seven I/O card slots
- Various power options
- Custom paint and logo available
- Configured System Offered
|
Additional
Photos |
The D5 Series chassis
is a high performance design in a low
cost 3U rackmount enclosure. The D5 Series
is a solid, robust design which will meet
the most rigorous and demanding requirements.
This chassis is complex in design and
is ideal for data and processing intensive
applications.
The enclosure is
constructed of 18 gauge steel, clear zinc
plated for corrosion protection and an
attractive
appearance. The front panel
is attractively detailed and is of heavier
gauge than the chassis.
There is a huge amount
of drive storage with the provided twelve
hot swap drive carriers. Up to 9 Terabytes
of drive storage can be accommodated.
Models for IDE, SATA and SCSI drives are
available. Also provided are drive bays
for a slim CD/DVD and slim floppy drive.
Two internal 2-1/2" drives can be
mounted for operating system support.
|
A full width door
covers and protects the drives and controls.
Accessible behind the door is the power
and reset switches. The drive and alarm
LED's are viewable through the door.
Cooling is provided
by four 51CFM hot swap fans mounted mid-chassis
plus one 23CFM exhaust fan. There is a
full width air filter mounted on the door.
Also provided is a thermal alarm system
to monitor internal chassis temperature
and fan operation. Other fan options are
available
The D5 Chassis provides
for mounting a standard EATX motherboard
up to 12 x 13 inches. Seven plug-in cards
can be installed.
Power is provided
by a rear mounted 2U or 3U style power
supply. Several power options are available
including DC operation and redundant operation.
|
Downloadable PDF
files
Part Number Matrix
| |
D5CHASSIS-SCA |
SCSI
drive carriers |
| |
D5CHASSIS-SATA |
SATA
drive carriers |
| |
D5CHASSIS-IDE |
IDE
drive carriers |
Dimensions
19" (wide) x
3U (5.20") (high) x 25.6" (deep)
Drive Capacity
Twelve hot swap drives - front accessible.
Models for IDE, SATA, and SCSI
One Slim CD/DVD - front accessible
One Slim Floppy - front accessible
Two 2-1/2 inch drive - internal
Two 3-1/2 inch drive - internal with optional
GHA-H431 bracket
Front Panel Controls (Behind
Door)
Switches - Power, Reset, Fan Alarm Reset
LEDs - 2* Hard Drive Access, 3* Network Activity,
Chassis Overtemp, Fan Failure, Power On
USB Ports - two
All the LEDs are visible with the door closed
Rear Panel Details
Seven Plug-in card slot
ATX I/O Shield
One DB25 connector knockout
One SCSI connector knockout
One IEC320 AC Power Inlet as required by power
supply installation
Cooling
Four 92mm 51CFM cooling fans in hot swap carriers
One 60mm 23CFM exhaust fan
Thermal Management Board
Monitors
the following chassis parameters. Audible alarm
sounded on system failure.
-
Fan
operation
-
Chassis
over-temperature settable for 40, 50, 60
deg C alarm point
-
Two
remote chassis temperature probes
-
Front
panel indication of system alarm status
Power Supply
Rear Mount 2U or 3U style
AC supply (2U)- Zippy P2U or P2G form factor
AC Supply (3U) - Zippy P3M form factor
AC Redundant (3U) - Zippy R2T or R3G form factor
DC supply - D2U form factor (48VDC only available)
Power supply not included. Contact Chassis Plans
for other power options.
Motherboard Mounting
Standard 12 x 13 inch EATX motherboard
Motherboard adapter plate accommodates any motherboard
Plug-in I/O Cards
Accommodates Seven plug-in I/O cards
Rack Slides
See Rack Slides for
an offering of available slides.
Chassis Plans is more than a chassis supplier.
We offer a complete product line including
the latest motherboards, drives, video boards
and plug-in cards including analog/digital
I/O cards. Integrating today's complex systems
can be a challenge. Allow us to provide
you with a professionally integrated system
with the OS loaded and the system tested
and burned-in as a complete unit. We
stand behind our work 100%. |
|
