- 2U x 17.7 inch depth design
- One 5.25 inch external drive
- One 3.5 inch external drive
- Three 49CFM cooling fans
- 6-Slot passive backplane
- Six I/O card slots
- Two front panel USB ports
- Various power options
- Custom paint and logo available
- Configured System Offered
|
Additional
Photos
|
The E1000 Series chassis is a high performance
design in a low cost 2U rackmount enclosure.
Feature rich, the E1000 Series is a
solid, robust design which will meet
the most rigorous and demanding requirements.
This chassis is ideal for high density
I/O intensive applications where a single
board computer is desired.
The enclosure
is constructed of 18 gauge steel, clear
zinc plated for corrosion protection
and an attractive
appearance. The front
panel is attractively detailed and is
of heavier gauge than the chassis.
The E1000 provides
for one 5.25 inch and one 3.5 inch
drive
externally accessible. Alternatively,
a slim CD-ROM and internal 3.5 inch
drive may be installed in place of the
5.25 inch drive. The drive cage and
filler provide for several configurations.
|
The chassis is
cooled by three high velocity 80mm 42CFM
ball bearing fans which draw through
a front accessible
filter and provide
positive air pressure to the chassis.
A door covers and
protects the drives. Accessible behind
the door is the power and reset switches
as well as the power-on and drive activity
LED's. The LED's are visible through
the door when it is closed. A USB connector
is provided at the front panel.
The E1000 Chassis
provides for mounting a butterfly style
6-slot passive backplane. Six standard
plug-in cards can be installed. Click
here for companion single board computers.
A standard PS/2
power supply will fit allowing several
power options.
|
Downloadable PDF
files
Dimensions
19" (wide)
x 2U (3.5") (high) x 17.7" (deep)
Drive Capacity
One 5-1/4 inch drive - front accessible
One 3-1/2 inch drive - front accessible
-- or --
One 3-1/2 inch drive - front accessible
One slim CD-ROM - front accessible
One 3-1/2 inch drive -internal
Front Panel Controls
Power
switch - Black momentary pushbutton with 2
position .100 header for board connection
Reset switch - Black momentary pushbutton
with 2 position .100 header for board connection
Power LED - green with 3 position .100 header
for board connection
Drive Activity - Red with 2 position .100
header for board connection
Dual USB ports
Switch and LED connectors are labeled at the
connector end
Rear Panel Details
6 Plug-in card slots
Cooling
Three 80mm 42CFM fans with tach signal
Positive chassis pressure
Power Supply
PS/2 form factor - not provided
AC Input - Zippy HG2, HP2, PSM, PSL, AX2, SP2,
LP2, MP2, SPE
Redundant AC Input - Zippy MRT, MRP, MRW, MRG,
DC Input - Zippy DB2 (24VDC), DD2 (48VDC), MB2
(24VDC), MD2 (48VDC)
Backplane Mounting
Plug-in I/O Cards
Accommodates six plug-in I/O cards
Rack Slides
See Rack Slides
for an offering of available slides.
Chassis Plans is more than a chassis
supplier. We offer a complete product
line including the latest motherboards,
drives, video boards and plug-in cards
including analog/digital I/O cards.
Integrating today's complex systems
can be a challenge. Allow us to provide
you with a professionally integrated
system with the OS loaded and the system
tested and burned-in as a complete unit.
We stand behind our work 100%.
|
|