RACK MOUNT SLIDES | RUGGED RACKMOUNT COMPUTER
INDUSTRIAL RACKMOUNT COMPUTER CHASSIS
Slide Rails
Chassis
Plans offers a variety of ball bearing and solid bearing slides
for mounting your chassis into rack enclosures. Most electronic
enclosures are based on dimensional guidelines per ANSI/EIA
310 Specifications. The slides we offer are designed to meet
these same dimensional standards and will fit any 19"
rack.
Please see the following table for a list of available part numbers and applications:
|
Part Number
|
Application
|
Type
|
Length
|
Extension
|
Enclosure
Depth |
Load
Capacity |
|
1U
|
Solid Bearing
|
20"
|
21"
|
20"-20.5" #
|
85 lbs each
|
|
|
1U
|
Solid Bearing
|
22"
|
23"
|
22"-22.5" #
|
85 lbs each
|
|
|
1U
|
Solid Bearing |
24"
|
25"
|
24"-24.5" #
|
85 lbs each
|
|
|
1U
|
Solid Bearing |
26"
|
27"
|
26"-26.5" #
|
85 lbs each
|
|
|
1U
|
Solid Bearing |
30"
|
31"
|
30"-30.5" #
|
85 lbs each
|
|
|
2U-6U
|
Ball Bearing
|
20"
|
21"
|
20"-26"
|
80 lbs each
|
|
|
2U-6U
|
Ball Bearing
|
26"
|
27"
|
26"-32"
|
80 lbs each
|
|
|
2U-6U
|
Solid Bearing
|
22"
|
23"
|
22"-22.5"*
|
85 lbs each
|
|
|
2U-6U
|
Solid Bearing
|
24"
|
25"
|
24"-24.5"*
|
85 lbs each
|
|
|
2U-6U
|
Solid Bearing
|
26"
|
27"
|
26"-26.5"*
|
80 lbs each
|
|
|
2U-6U
|
Solid Bearing
|
30"
|
31"
|
30"-30.5"*
|
80 lbs each
|
# Extends 0-6" with optional B-309 or B-389 1U Rear Extension Mounting Bracket.One of the frustrations of slide selection is the hole pattern for mounting the slide to the chassis. There isn't an established industry standard, so different brands of slides incorporate different patterns. Adding to the frustration, most slide manufacturers use a different pattern for different lengths of slides. You might purchase a chassis that utilizes a 20" slide for installation into a 20" deep enclosure. However, if you want to mount it into a 30" deep enclosure you will discover that the hole pattern for a 30" slide isn't the same; you must modify either the chassis or the 30"slide.
* Extends 0-6" with optional B-308 2U Rear Extension Mounting Bracket.
Chassis Plans has designed this frustration out of our products. All of our chassis use a consistent mounting hole pattern, and any length of slide listed above will mount to any chassis we offer.
In addition, Chassis Plans can modify a standard chassis to accept slides from other vendors such as Jonathan or Accuride.
For additional information about mounting chassis into enclosures, see the Rack Slide Use guide.
Components - Rackmount Chassis