The SA2U-12EHP performance-optimized storage array is designed to meet the needs of customers who require the highest levels of SAN performance in the most demanding environments such as military organizations and telecommunications equipment providers. The SA2U-12EHP boasts measured performance of an amazing 375,000 IOPS (same sector cache) and provides more than 1.6Gb/second read and 1.3Gb/second write throughput, driving application performance to new levels.
To ensure that the SA2U-12EHP performs under rugged conditions, the SA2U-12EHP has been tested to meet the NEBS Level 3 telecommunications standard, and military's MIL SPEC 810F standards for land, sea and air deployment. The SA2U-12EHP is ideal for building SANs that may need to perform in mobile situations, with the option to deploy solid state disks (SSDs). |
The performance-optimized SA2U-12EHP storage array provides four 4Gb fibre channel interfaces and supports a wide variety of SAS, SATA-II, and SSD drives - allowing customers to chose the performance and storage capacity that they need.
The architecture offers even more value and investment protection to customers through data-in-place migration. Data-in-place migration allows customers to upgrade from the 2730 storage array to a SA2U-12EHP storage array by replacing only the RAID controllers and leaving the disk drives in place.
Advanced data protection features which allow customers to implement point-in-time snapshot backups and complete volume copies. |
GENERAL
Product Type
Chassis Configuration
Disk Architecture
Max Drives per Chassis
Total Disks Supported
Mounting Options
Max Number of Chassis
Max Capacity per Chassis
Data Management Services (DMS)
Hosts
Supported Hosts
Interface Type
External Ports
Drives
Max Number of Drives
Drive Options
RAID
Levels Supported
RAID Type
Cache Memory
Cache Backup
Virtual disks per System
Volumes per virtual disk
Volumes per System
Mirrored Cache
Super Capacitor Cache Backup
Cache Backup to Flash
Management
Interface Types
Protocols Supported
Management Consoles
Management Software
AC Power Requirements
Input Power Requirements
Max Input Power
Heat Dissipation
DC Power Requirements
Voltage
Max Input Power
Heat Dissipation
Temperature and Humidity Ranges
Operating Temperature
Shipping Temperature
Operating Humidity
non-condensing
Non-Operating Humidity
Declared Acoustic Noise Levels
Sound Power
Sound Pressure
Shock and Vibration
Shock, Operational
Shock, Non- Operational
Vibration, Operational
Vibration, Non- Operational
|
RAID, JBOD
2U
3Gb SAS/3Gb SATA-II
12 drives
108
19” Rack, Rack tray
9(1 RAID and 8 JBOD)
12TB (1TB SATA-II)
Snapshot and volume copy
Up to 8 direct connected hosts, 2/4 Gbit FC
FCP
4/8 Dual Controller
108
3Gb SAS 146GB 15K RPM
3Gb SAS 300GB 15K RPM
3Gb SAS 450GB 15K RPM
3Gb SATA-II 500GB 7200 RPM
3Gb SATA-II 750GB 7200 RPM
3Gb SATA-II 1TB 7200 RPM
3Gb SATA-II 1TB 5400 RPM
Non-RAID, 0, 1, 3, 5, 6, 10 and 50
Hardware
1GB per controller
Battery-free protection
with super capacitors
32
256
512
Yes
Yes
Yes - Non-volatile
Mini DB9 RS232, 10/100 Ethernet
SNMP, SSL, SSH, SMTP, SMI-S Provider
WEB GUI, CLI
RAIDar 2.0
100-240VAC 50/60Hz 4.5–1.9A
500W ma maximum continuous
1706 BTU's/hour
-40 to -72VDC,
-48/-60V nominal
500W maximum continuous
1706 BTU/hour
41°F to 104°F (5°C to 40°C)
-40°F to 158°F
(-40°C to 70°C)
Note: Derate 2°C for
every km, up to
3000
meters
10% to 90% RH @ 104°F (40°C),
Up to 93% RH @ 104°F (40°C)
non-condensing
<6.038B Sound Power
<55dBA Sound Pressure
5.0G, 10ms, half sine
15G 11ms, half sine
0.21Grms Random
5Hz to 500Hz
flat spectrum/feed forward
0.5G 1 octave/minute 5Hz to 500Hz to
5 Hz sine sweep
0.5Grms Random 20Hz to-1000Hz flat
spectrum |
|
High-Availability Features
Redundant Hot- Swap Controllers
Redundant Hot- Swap Disk
Redundant Hot- Swap Fans
Redundant Hot- Swap Power
Dual Power Cords
Hot Standby Spare
Automatic Failover
Multi-Path Support
On-line Firmware Upgrade
Snapshot
Volume Copy
Regulatory
Safety
Electromagnetic Compatibility
Environmental
RoHS and WEEE
Country Approvals
Support
Software Warranty
Standard Hardware Warranty
Environmental Monitoring
Phone-home Capability
Remote Diagnostics
Non-disruptive Updates
Non-disruptive Volume Expansion
Physical
Height
Depth
Width
Chassis Weight
Chassis Weight (w/148GBdrives) |
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
UL 60950-1:2003 (USA)
CAN/CSA-C22.2 No.60950-1-03 (Canada)
EN 60950-1 :2001 + A11 (EU)
IEC 60950-1 :2001 (International)
CFR 47 Part 15 Subpart B (U.S.A., Class A)
ICES-003 Issue 4 (Canada, Class A)
EN 55022 :98 +A1 +A2 (EU, Class A)
EN61000-3-
2:2000+A1,+A2,
+A14
(Harmonics)
EN 61000-3-3 :2001 (Flicker)
EN 55024 :1998 +A1 (EU,Immunity)
EN 300 386 v1.3.3
CISPR 22 :2005 (International, Class A)
CISPR 24 :97 (International, Immunity)
GR-1089-CORE Issue 4 (NEBS)
GR-63-CORE Issue 3 (NEBS)
ETSI EN 300 019-2-1 v2.1.2 (EU, Class 1.2)
ETSI EN 300 019-2-2 v2.1.2 (EU, Class 2.3)
ETSI EN 300 019-2-3 v2.1.2 (EU, Class 3.2)
Acoustics ISO7779 / ISO9296
RoHS-5 Compliance, China RoHS, WEEE
Australia/New Zealand, Canada, China (PRC),
European Union (EU), Germany (GS Mark), Japan,
South Korea, Taiwan, United States
90 days
3 years
SNMP, CLI, RAIDar 2.0, SMTP, SMI-S Provider
Yes
Yes
Yes
Yes for primary volumes
and snapshot volumes
3.5 Inches / 8.9cm
(excluding cables) 23.7 Inches / 60.2cm
17.6 Inches / 44.7cm
45lbs. / 20.5kg
66lbs (array only) / 29.94kg |
|
MILITARY GRADE RACKMOUNT DISK STORAGE ARRAYS | 12-DRIVE RACK MOUNT DISK STORAGE | HIGH IOPS DISK STORAGE SYSTEMS
Chassis Plans is more than a chassis
supplier. Our primary business is providing long life span fully integrated turnkey systems tailored exactly to customer specification. We are experts at multi-vendor integration and offer a complete product
line including the latest long-life motherboards,
drives, video boards and plug-in cards
including analog/digital I/O cards.
Integrating today's complex systems
can be a challenge. Allow us to provide
you with a professionally integrated
system with the OS loaded and the system
tested and burned-in as a complete unit.
We stand behind our work 100%.
|
|
|
