BP7/6 BACKPLANE SLOTS - 6 ISA, 6 PCI, 1 CPU , TRENTON TECHNOLOGY SYSTEM HOST BOARD SINGLE BOARD COMPUTER

Transit Case and Rack System Integration

SINGLE BOARD COMPUTERS & ACTIVE / PASSIVE BACKPLANES

Chassis Plans - BP7/6 7 ISA Slots plus 6 PCI Slots ISA/PCI Backplane

FEATURES

6 ISA Slots

6 PCI Slots

1 CPU Slot

* = Pin 1
Connectors spacing is .800" centers
All dimensions are inches
Mounting holes .156" diameter

ISA SLOTS
Provides six ISA Bus slots for the use of standard ISA Bus option cards.

PCI LOCAL BUS SLOTS
Provides six PCI Local Bus slots for the use of standard PCI Local Bus option cards.

CPU SLOT
Accepts a PCI Industrial Computer Manufacturers Group (PICMG) 1.0 compliant processor.

PRINTED CIRCUIT LAYERS
The backplane is a six-layer .062" thick board. Three signal layers, +5 voltage layer, +3.3 voltage layer and ground layer. Multi-layer construction provides excellent noise immunity.

POWER CONNECTORS
The standard AT power connection is available through a 12-pin AT-style connector. Power connection for +3.3V is available through a 12-pin AT-style connector or an ATX connector (optional).

KEYBOARD CONNECTORS
Three keyboard connectors: two are 5-pin headers and one is a standard AT 5-pin DIN connector. These connections provide options for front or rear mounted keyboard connectors.

AUXILIARY POWER CONNECTOR
Additional power capacity is available through a 6-pin AT-style connector.

POWER INDICATORS
The power indicators provide a convenient visual check for +5V, -5V, +12V, -12V and +3.3V power connections.

PCI-TO-PCI BRIDGE
The PCI-to-PCI bridge supports the PCI 2.1 specification. This bridge allows PCI Local Buses to extend the electrical loading limits of a single PCI Bus and to operate independently, allowing for communication within the same bus even if the other PCI Buses are busy. The BP7/6T-2.1 backplane has bus mastering capabilities on all six PCI Local Bus slots.

BP7/6