|
ISA SLOTS
Provides 12 ISA Bus slots for the
use of standard ISA Bus option cards.
PCI LOCAL BUS SLOTS
Provides 6 PCI Local Bus slots. All
PCI Slots are 33 MHz, and support 64 bit and 32 bit
Standard PCI Local Bus option cards.
CPU SLOT
Accepts a PCI Industrial Computer
Manufacturers Group (PICMG) 1.0 compliant processor.
PRINTED CIRCUIT LAYERS
The backplane is a six-layer .062"
thick board. Three signal layers, +5 voltage layer,
+3.3 voltage layer and ground layer. Multi-layer construction
provides excellent noise immunity.
POWER CONNECTORS
The standard AT power connection is
available through two 12-pin .156 MTA connectors or
one terminal block connector. Power connection for +3.3V
is available through a 12-pin .156 MTA connector or
an ATX connector (optional).
|
AUXILIARY POWER CONNECTOR
Additional power capacity is available
through two 6-pin .156 MTA connectors.
POWER INDICATORS
The power indicators provide a convenient
visual check for +5V, -5V, +12V, -12V and +3.3V power
connections.
PCI-TO-PCI BRIDGE
The PCI-to-PCI bridge supports the
PCI 2.1 specification. This bridge allows PCI Local
Buses to extend the electrical loading limits of a single
PCI Bus and to operate independently, allowing for communication
within the same bus even if the other PCI Buses are
busy. The BP13/6-64 backplane has bus mastering capabilities
on all 12 PCI Local Bus slots.
64-BIT BACKPLANE
Provides 64-bit PCI Local Bus slots
for the use of 33MHz PCI Local Bus option cards. The
64-bit feature is available on this model.
|
