T4I PENTIUM 4 OR CELERON SINGLE BOARD COMPUTER , TRENTON TECHNOLOGY SYSTEM HOST BOARD SINGLE BOARD COMPUTER

Transit Case and Rack System Integration

SINGLE BOARD COMPUTERS & ACTIVE / PASSIVE BACKPLANES

T4I Single Board Computer using the Intel® Pentium® 4 Processor

FEATURES

	Intel® Pentium® 4 processor
	NetBurst™ Micro-Architecture
	Hyper-Pipelined technology
	10/100 Base-T Ethernet and 10/100/1000 Base-T Ethernet
	Ultra160 SCSI
	2GB of DDR200/266 memory
	400/533MHz system bus
	Intel® Celeron® Processor Option

DESCRIPTION
When you need flexibility, scalability and long-life support consider the T4I. This SBC supports the Intel 845E chipset and either the Pentium^® 4 or socket-478 Celeron^® processor. A flexible board design enables you to scale the T4I to closely match processing power with application need. Making the T4I a good fit regardless of the system application. Of course, all this comes with the long-life embedded product support you expect from Chassis Plans.
Download the T4I datasheet - Click Here

PROCESSOR
Intel^® Pentium^® 4 processor at 2.0GHz to 3.06GHz*
Intel^® Celeron^® processor at 2.0GHz*

*higher speeds as available

CHIPSET
Intel's 845-E chip set provides support for a faster system bus, DDR200/266 memory and dual USB 2.0 compatible interfaces.

SYSTEM BUS
The Intel 845-E chip set supports a system bus speed of 400/533MHz.

BUS SPEED

ISA	16-bit/8MHz
PCI	32-bit/33MHz
System/FSB	400/533MHz

BIOS (FLASH)
AMIBIOS8 with built-in advanced CMOS setup for system parameters, peripheral management for configuring on-board peripherals, PCI-to-PCI bridge support and PCI interrupt steering. Supports flash devices for BIOS upgrading via floppy interface. Also provides integrated support for USB mass storage devices such as USB CD-ROM, CD-RW, etc. Custom BIOSs are available upon request.

CACHE MEMORY (L2 AND L1)
The Pentium 4 processor supports a 512K integrated on-die Advanced Transfer Cache (L2). The cache is an 8-way set associative cache running at full processor core frequency.

The Celeron processor supports a 128K integrated on-die Advanced Transfer Cache (L2).

Both processors include a 12K level one (L1) Execution Trace Cache and 8K L1 data cache.

DDR200/266 MEMORY
Double Data Rate (DDR) memory improves memory data speeds demanded in data-intensive applications. The DDR200/266 interface is a single channel interface coming off the Memory Controller hub and terminating at two DIMM module sockets. The DIMM sockets can be independently populated with either PC1600 or PC2100 unbuffered memory modules. The memory interface supports auto detection of memory up to 2GB. The bandwidth of the DDR200/266 memory interface is 1600MB/s or 2100MB/s.

ULTRA160 SCSI INTERFACE
The Ultra160 SCSI interface uses an Adaptec SCSI controller that supports SCSI device data transfer operations up to 160MB/s. The interface complies with the SPI-3 standard and is compatible with both Single-ended and Low Voltage Differential (LVD) SCSI I/O. Software drivers are available for most popular operating systems.

PCI BUS INTERFACE
The PCI bus interface supports a 32-bit PCI backplane interface running at a 33MHz bus speed.

ISA BUS
The T4I provides a 16-bit ISA bus interface to the backplane for legacy ISA slots.

SYSTEM HARDWARE MONITOR
The Winbond W83783S chip supports hardware monitoring. The functions monitored are voltage, fan speed and temperature. The T4I hardware monitor driver allows the user to program the monitor limits to provide a trigger point for the application software. This allows the application program to monitor these trigger points in order to send system alert messages or perform corrective action.

FLOPPY DRIVE INTERFACE
Supports up to two floppy disk drives in combinations of 360K to 2.88MB.

SUPER XGA VIDEO INTERFACE
The Intel 69030 video interface has 4MB of on-chip memory and supports pixel resolutions up to 1280 x 1024. Software drivers are available for most popular operating systems.

SERIAL INTERFACE
The Super I/O controller supports two full-function serial ports with independently programmable baud rates. The controller has two high-speed, NS16C550 compatible UARTs with Send/Receive 16-byte FIFOs. The IRQ for each serial port has BIOS selectable addressing.

DUAL ETHERNET INTERFACES - 10/100BASE-T AND 10/100/1000BASE-T
There are dual Ethernet LAN ports on the T4I. LAN Port 1 functions as a traditional 10/100Base-T port, while LAN Port 2 offers Gigabit (1Gb/s) connectivity in addition to the traditional 10/100Base-T interface. RJ-45 connectors located on the I/O bracket provide the mechanical interface to the Ethernet networks.

EIDE ULTRA ATA/100 INTERFACES (DUAL)
Dual high-performance PCI Bus Master EIDE interfaces are capable of supporting up to two IDE disk drives each in a master/slave configuration. The interface supports Ultra ATA/100 with synchronous ATA mode transfers up to 100MB per second.

WATCHDOG TIMER
The programmable watchdog timer provides a system reset with a total range of 30ms to 60 seconds. The programmable increments of the watchdog are 30ms, 10s and 60s.

ENHANCED BI-DIRECTIONAL PARALLEL INTERFACE
The parallel port interface is compatible with IBM PC/XT^®, PC/AT^®, PS/2T, Enhanced Parallel Port (EPP1.7, EPP1.9) and Extended Capabilities Port (ECP) modes of operation. Both the EPP and ECP modes are IEEE 1284 compliant. The parallel port has BIOS selectable addressing.

KEYBOARD AND PS/2 MOUSE INTERFACES
The mini DIN connector located on the I/O bracket provides an external interface for a PS/2 mouse and keyboard. A "Y" adapter plugged into the mini DIN connector allows the PS/2 mouse and keyboard to share the same port. Internal PS/2 mouse and keyboard headers are also available. A self-resetting fuse protects the +5V line of the keyboard and the mouse.

POWER REQUIREMENTS
Typical Values
Pentium 4:

CPU	+5V*	+12V#	+3.3V*
3.06GHz/533MHz	4.05A	6.75A	2.75A
2.8GHz/533MHz	4.05A	4.68A	2.75A
2.4GHz/533MHz	3.96A	3.91A	2.68A
2.0GHz/400MHz	4.00A	3.38A	2.66A

Celeron:

CPU	+5V*	+12V#	+3.3V*
2.0GHz/400MHz	4.01A	3.43A	2.72A

-12V @ < 100mA*

* From Backplane via PICMG^® Connector.
# From ATX12V power supply or equivalent via P4 connector.

The Pentium 4 processor's power requirements created the need for an additional on-board 4-pin power connector (P4). This connector requires +12V from an external power supply that conforms to the ATX12V power specification.

This external power supply should have a minimum wattage rating of at least 250W. The T4I also requires that 3.3V be applied to the backplane from the power supply.

POWER FAIL DETECTION
The T4I continuously monitors the incoming +5V and +3.3V power lines from the system backplane. If the 5V line drops below 4.75 volts or the +3.3V line drops below 2.97 volts, the T4I issues a hardware-reset command. This feature helps maintain control and allows the system to automatically restart. A two-pin header is available for applications that require an external reset switch. On-board power lines are also monitored in a similar fashion.

BATTERY
Built-in lithium battery for data retention of CMOS memory.

TEMPERATURE/ENVIRONMENT

Operating Temperature	0° - 45° C.
Storage Temperature	-40° to 70° C.
Humidity	5% to 90% non-condensing.

A Pentium 4 processor can consume as much as 70 Watts of power on the T4I single board computer. The T4I's cooling system uses a high-reliability fan.
MECHANICAL
Chassis Plans's engineers have devised a low-profile (1.65" height) active cooling system. Overall dimensions for the T4I, including the active cooling system are 13.3"L (338mm) x 4.8"H (121.9mm) x 1.65"W (49.1mm).

STANDARDS
- IEEE P996, Personal Computer Bus Standard
- PCI Local Bus Specification 2.1
- PICMG 1.0 Specification
- Ultra160 SCSI, SPI-3 Standard

MEAN TIME BETWEEN FAILURES (MTBF)
118,000 POH (Power-On Hours) at 40° C., per Bellcore.

MODEL NAME: T4I

MODEL#	MODEL NAME	SPEED
Pentium^® 4
S6053-108-xM	T4I/3.06	3.06GHz
S6053-107-xM	T4I/2.8	2.8GHz
S6053-104-xM	T4I/2.4	2.4GHz
S6053-002-xM	T4I/2.0A	2.0GHz
Celeron^®
S6053-502-xM	T4I/2.0	2.0GHz
(xM = Memory)

T4I Datasheet - Click Here
T4I Technical Reference - Click Here
T4I Reference Manual - Click Here
SBC Support Page (drivers, etc.) - Click Here

Single Board Computers

Single Board Computers

Dual Processor SHB
PCI Express

Single Processor SHB
PCI Express

Single Processor SBC

Option Cards