Transit Case and Rack System Integration

SINGLE BOARD COMPUTERS & ACTIVE / PASSIVE BACKPLANES

FEATURES

Two ISA Slots
Six 64-bit/66MHz PCI Slots
Four 64-bit/33MHz PCI Slots
One SBC Slot

PCB thickness .062"
Connector spacing .800" centers
Mounting holes .156" diameter
All dimensions are inches.

Please Note:
This backplane is built to order and
a 50 piece minimum quanity is required.

ISA BUS SLOTS
Provides two ISA Bus slots for the use of standard ISA Bus option cards.

PCI LOCAL BUS SLOTS
Provides ten PCI Local Bus slots for the use of standard PCI Local Bus option cards.

SBC SLOT
Accepts a PICMG^® 1.0 compliant processor.

PRINTED CIRCUIT LAYERS
The backplane is a six-layer, .062" thick board with three separate signal layers: +5V, +3.3V and ground. Multi-layer backplane construction provides excellent noise immunity.

POWER INDICATORS
The power indicators provide a convenient visual check for +5V, -5V, +12V, -12V and +3.3V power connections.

POWER CONNECTORS
The standard AT power connection is available through a 12-pin .156 MTA connector. Power connection for +3.3V is available through a 12-pin .156 MTA connector or an ATX connector (optional).

AUXILIARY POWER CONNECTOR
Additional power capacity is available through a 6-pin .156 MTA connector.

PCI-TO-PCI BRIDGE
The PCI-to-PCI bridge supports the PCI Local Bus 2.1 specification. This bridge allows the PCI Local Buses to extend the electrical loading limits of a single PCI Bus and to operate independently, allowing for communication within the same bus even if the other PCI Buses are busy. The BP3/6/4 backplane has bus mastering capabilities on all ten PCI Local Bus slots.

MODEL NAME: BP3/6/4